Reverse Osmosis Drinking Water System
Model no. HW-LP-RO (FDA Listed)
- Features of HW-LP-RO
* Undersink type
* Use of RO membrane Filter
- Average Flow Rate(GPD): 50,75,100,150 GPD
- Improving the TDS(Total Dissolved Solids) rejection
- Meets all different water quality needs.
* With booster pump
- Using the high quality booster pump that can provide 100-120psi water pressure to pass through the membrane even with areas under low water pressure.
* Use of RO membrane Filter
- Average Flow Rate(GPD): 50,75,100,150 GPD
- Improving the TDS(Total Dissolved Solids) rejection
- Meets all different water quality needs.
* With booster pump
- Using the high quality booster pump that can provide 100-120psi water pressure to pass through the membrane even with areas under low water pressure.
- Recommended Operating Regulation of RO
2) Rate of removal and the volume of treated water depends on water temperature, water pressure, condition of raw water and etc.
3) Product Specifications for RO Membrane.
Permeate flow and slat rejection are based on the following test conditions.
: 250ppm(NaCI) softened tap water, 77°F(25°c), 15% recovery and the specified applied pressure
Product Information
Pure & Clean Water!
- Application of Big Capacity Combine filter. (Sediment-Carbon Combination filter)
- Easy to handle and install the systems.
- Supplies clean and safe drinking water by the qualified Filters and RO system.
- Providing our customers with Best Water Filtration systems by our high tech.
- Suitable for many different markets by applying the proper filter systems.
- Tempered Glass front panel applied for durability.
- Specification
| Condition | Minimum | Maximum |
|---|---|---|
| Inlet Pressure | 30psi | 100psi |
| Inlet Temperature | 40°F (4.4°C) | 113°F (45°C) |
| pH Range | 4.0 | 10.0 |
